
The AS/NZS approved Isolite Guard is a suitable fire resistant enclosure, designed for retro-fit installation where there is access to the downlight from in the ceiling. Isolite is available in two sizes – 72mm and 94mm; two optional accessories - Transformer Isolator and Spacer Accessory. No side clearances are required to timber or insulation when installed around 12V fittings. 240V installation with Isolite is detailed in this instruction flyer also.
Click here to download the Isolite Downlight Guard Installation Instruction Flyer
The AS/NZS approved Flexi is a suitable fire resistant enclosure, designed for retro-fit installation from below where there is no ceiling access; i.e. between floors, skillion roofs. Flexi is available in many sizes to suit virtually any downlight or combination of downlights. FRE models can be installed without side clearances to timber and insulation on all sides.
Click here to download the Flexi Downlight Enclosure Installation Instruction Flyer
The AS/NZS60598 compliant Firebreak downlights are 90 minute fire rated to BS476 and are supplied with an integral, fire protection enclosure; Osram transformer and globe are included as standard. Available in Fixed (75mm cutout), Tilt (90mm cutout) and IP65 Showerlight (72mm cutout). Fixed and Tilt LV models require only 25mm clearance from timber and insulation. Also suitable for installation into most timber lined ceilings.
Click here to download the Firebreak 12V Downlight Installation Instruction Flyer
EECOLITE CFL / LED DEDICATED GU10 DOWNLIGHT
The AS/NZS60598 compliant Eecolite is 90 minute fire rated to BS476 and is designed specifically for GU10 mini CFL’s & LED's < 13 watt (cannot accept halogens) Available in Fixed (75mm cutout) and just released in IP65 Showerlight (72mm cutout). Eecolite can be installed abutting timber and insulation.
Click here to download the Firebreak EECOLITE Downlight Installation Instruction Flyer.
FIREBREAK 240V GU10 DOWNLIGHT
The AS/NZS60598 compliant Firebreak downlights are 90 minute fire rated to BS476 and are supplied with an integral, fire protection enclosure; Osram globes are included as standard. Available in Fixed (75mm cutout), and Tilt (90mm cutout), which only require 25mm clearance from timber and insulation. Also suitable for installation into most timber lined ceilings.
Click here to download the Firebreak 240V Downlight Installation Instruction Flyer